Important Components to Make an Automatic Lubrication System

 Important Components to Make an Automatic Lubrication System

A lubrication system is a process of operating machines and equipment for better performance at a reduced cost. Proper lubrication is a must for improving the efficiency and performance of equipment, as it brings so many benefits to your machine. Probably, an automatic grease lubrication system increases the life span of your machines.

Why Choose Automatic Lubrication System?

Why do you need to choose an automatic lubrication system when other options are available? There are so many reasons to select an automatic lubrication system? It is better than a manual system, as you often damage your machine due to too much lubrication. Hence, too little and too much lubrication can affect the performance of your machine.

It can produce overheat and friction that is bad for your equipment. Looking at this point, it is the only reason to select an automatic lubrication system to keep machines running in a better position. It can damage the seals of barring, so the best is to lubricate the machine in moving form. You must do it when the machine is in running form.

Automatic lubrication is safe and protected when compared to the traditional lubrication process. In an automatic system, you lubricate the bushes and bearings with the proper supply needed under safe control. It works only when there is a need for lubrication and that is the benefit of choosing this system.

What are the Basic Components of Automatic Lubrication System?

An automatic lubrication system has so many components, whereas it works along with the controller, pump, metering device, tubing, and lubrication points. You can also enhance the operating system at the time of fitting. The accessories are also a part of this system that you can use for mining, manufacturing, and other industrial operations. Here are the basic components!

Metering Device

Automatic machines have so many components that are ideal for lubricating. Automatic lubrication is ideal for metering devices to keep the fluid at two points. It has to serve two points to avoid resistance, but sometimes it leads to one point to prevent fluid from resistance.


The pump is another key component to be used in the lubrication system. It provides flow to manage grease and oil for setting metering devices. There are so many pumps available that enhances flow rate and pressure ranges to balance the power sources. It is compatible and good for boosting power sources and managing flow rate at the same time.

Usually, pumps are used with injectors that come with a vent valve so that you may reset the meter anytime. For this, you can fix piston pumps as a lubricator and that is how pumps work to manage the lubrication system.


A controller is also a basic component to be used in a lubrication setup, whereas you prefer to use schedule programs. The controller is a built-in process that has different applications and settings. It is programmable for lubrication. Indeed, it is the leading feature of using this component alongside voltage and sensors to run the application. The one who controls it should also take care of input connections.

Tubing and Fittings

Apart from using controllers, the use of tubing and fitting is also a part of the lubrication system. It is the basic component that you have to use for organizing automatic lubrication. It builds pressure in the system that needs diameter to allow grease or oil to maintain the pressure.

The weak tubes can burst easily to cause injuries. The fluid may not pass if you choose narrow and tight tubes. The better is to select tubes that can handle the pressure without any issues. The fluid should pass easily from the tube to manage hassle-free fitting.

Other Parts

Besides these key features, the other parts include sensors for detecting the pressure and oil filters to maintain the air. For an automatic grease lubrication system, you also need to check valves and stroke sensors for the efficient working of the machine.

Clare Louise

Related post